Choose language English

24.9.2014

New materials and new ideas for the transportation industry

Primo shows customized profile solutions for the international transportation industry at IAA in Hannover.

From the 25th of September 2014 to the 2nd of October, Primo will be part of IAA in Hannover, Germany. The IAA fair is one of the world’s largest venues for the commercial transportation industry, and at the Primo stand, visitors will be able to see and experience advanced solutions in extruded profiles for commercial vehicles: Door sealings, curtain side profiles, rain stops, tubes, hoses, tank straps and a lot more.

Primo’s specialist knowledge in the development and production of extruded and co-extruded profiles has made us a well-known supplier to the international transportation industry. From trucks to trains, from ships to cars, Primo supplies an amazing variety of extruded plastic profiles which form part of any modern vehicle. In fact, the demand for such profiles is constantly increasing, as new materials and methods are being invented.

The Business Area Director for Traffic and Transport within Primo, Joakim Häggblom, explains: “In the transportation industry, it’s often a question of finding alternative materials to replace traditional ones like metal. Extruded plastic profiles for frames, tubes, ceiling profiles and so on are recyclable and help reduce the weight of vehicles, so there’s a huge environmental benefit in using our profiles. And what’s more, new materials often make it possible to think in entirely new ways when it comes to building vehicles. We’re a vital part of this mega-trend in vehicle construction, because we know extrusion so well – and we know how to develop ideas together with our customers.”

DIY door sealings for trailer producers

Another innovation shown by Primo is a new range of standardized door sealings designed specifically for cooling trailers and truck body doors to a high specification.

But it’s more than that – Primo also offers small and medium-sized producers of trailers and truck bodies the chance to make customized gaskets themselves, using Primo raw materials and a custom-built welding unit.

Primo offers the producers full product training and instruction in operating the welding equipment.

See how it works – Primo has made a short video showing how you can undertake the corner welding process. Watch the video here >>

For medium-sized and smaller trailer producers, there are significant advantages and cost savings in producing door gaskets themselves: Benefits in production costs and benefits in being able to deliver customized doors quickly.

You can find Primo Profiles at stand no. C67 in hall no. 25.

Visit the IAA fair at www.iaa.de/en
Click logo to visit IAA Trade Show home page

 

ARCHIVED NEWS

Recyclable, useful and clever: Why we believe in plastics

16.11.2018 - Recyclable, useful and clever: Why we believe in plastics

Used correctly, plastics and plastic composites can help reduce the environmental impact of food production, transportation and heating. On top of that, most thermoplastic materials are 100 % recyclable. This is why Primo firmly believes in plastics as the material of tomorrow as well as today.

Read full story
When time-to-market really matters

2.11.2018 - When time-to-market really matters

In most industries time-to-market (TTM) is a crucial factor that can make all the difference between success and failure. It is, however, often difficult to establish an ideal time-to-market – the sooner, the better seems to be the standard answer.

Read full story
Door seal welding unit now available in “light” edition

4.9.2018 - Door seal welding unit now available in “light” edition

For builders of truck trailers, Primo recently launched a ground-breaking DIY welding unit for door sealings. Since the introduction, the welding unit has enjoyed great success, making life easier for trailer builders big and small.

Read full story
New in-house PVC recycling facilities at Primo Germany

4.9.2018 - New in-house PVC recycling facilities at Primo Germany

Primo Germany has just invested in its own PVC regrinding and recycling equipment. The results: Less production waste, more precise control of the use of recycled PVC, and a strong, green product for the window and door producers.

Read full story
Dealing with the waste: Our commitment to recyclability

16.5.2018 - Dealing with the waste: Our commitment to recyclability

Everything that is manufactured generates waste of some sort. In plastic production, however, almost all production waste is recycled directly at the plant: Cut-offs, faulty products and the like.

Read full story
Treating fractures with a biodegradable material:  Primo manufactures revolutionary new materials for orthopaedic casts

26.4.2018 - Treating fractures with a biodegradable material: Primo manufactures revolutionary new materials for orthopaedic casts

Primo has developed the production processes for a highly innovative material used for casts and splints: Woodcast, invented by Onbone OY.

Read full story

1 2 3 4 5 6 7 8 9 10 11 

Next 6 items >>

This website uses cookies to track your behavior and to improve user experience on the site

You can delete saved cookies by visiting the advanced settings of your browser

Our cookie policy can be found here >>

Do not accept cookies Only accept functional cookies Accept all cookies